Skip to product information
1 of 8

Woca Denmark

WOCA | DECK OIL BUNDLE (50M² OR LESS)

WOCA | DECK OIL BUNDLE (50M² OR LESS)

Regular price $971.00 NZD
Regular price $1,121.00 NZD Sale price $971.00 NZD
Sale Sold out
Tax included. Shipping calculated at checkout.
WOCA | CHOOSE YOUR COLOUR

Deck Oil Bundle - for decks of 50m² or less

Bundle Includes:

  • 1 x Woca Exterior Wood Cleaner (2.5L)
  • 4 x Woca Exterior Wood Oil (2.5L) - choose your colour
  • 1 x Exterior Oil Applicator with handle
  • 1 x Exterior Oil Applicator replacement Pad
  • 1 x Premium Monarch Wall Brush

TRY COLOUR SAMPLES HERE

FOR LARGER DECKS YOU CAN ADD ADDITIONAL CLEANER OR OIL TO YOUR BUNDLE

How to use:

  1. Remove all loose foliage, branches, leaves etc. and then soak the wood with water, ideally using a hose.
  2. Mix Exterior Wood Cleaner with water in a ratio of 1:2 - 1:10 depending on how dirty the wood is.
  3. Apply the cleaner in an even coat, using a brush or spray nozzle. Leave the cleaner to work for five minutes.
  4. Scrub in the longitudinal direction of the wood grain using a stiff-bristled brush until the surface is clean. 
  5. Rinse off the cleaner with plenty of water and leave the wood to dry for at least 24-48 hours before the application of Exterior Wood Oil. The wood must be completely dry. If a completely smooth surface is desired, de-nip the wood with a 120-150 sanding pad before oiling.
  6. Stir the Oil carefully before and during use. 
  7. Apply an even and thin coat of oil with the brush and Woca Oil Applicator. It is important to not over saturate the wood.
  8. Wipe off any excess oil with a clean cotton cloth after no more than 5 minutes. Take particular care of removing excess oil from joints and grooves.
  9. Leave to dry for 24 hours before applying a second coat. It takes 24-48 hours at 20°C for the oil to harden thoroughly, depending on weather conditions and outdoor temperature.
  10. When the wood is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hard wearing surface.

*Always test the product on an inconspicuous spot before use to ensure it is compatible with the surface.

*Treatment should only be performed in dry weather conditions. Avoid direct sunlight and excessive heat.

*Recommended for freshly sanded, untreated timber or timber previously coated with the WOCA system.

View full details