WOCA | EXTERIOR WOOD CLEANER

Plant-safe outdoor cleaner for timber, brick, paving and concrete surfaces

• Effective removal of dirt, mould, stains, grease and green growth
  
• Prepares the surface for subsequent treatment
• Ideal for cleaning timber before coating with 'WOCA Exterior Wood Oil'
• Ideal for all species of wood
• Coverage: 8-10sqm / litre once mixed (1:2 mix w/water)

How to use:

1. Remove all loose foliage, branches, leaves etc. and then soak the wood with water, ideally using a hose.
2. Mix Exterior Wood Cleaner with water in a ratio of 1:2 - 1:10 depending on how dirty the wood is.
3. Apply the cleaner in an even coat, using a brush or spray nozzle. Leave the cleaner to work for five minutes.
4. Scrub in the longitudinal direction of the wood grain using a stiff-bristled brush until the surface is clean. 
5. Rinse off the cleaner with plenty of water and leave the wood to dry for at least 24-48 hours before the application of Exterior Wood Oil. The wood must be completely dry. If a completely smooth surface is desired, de-nip the wood with a 120-150 sanding pad before oiling.

*Always test the product on an inconspicuous spot before use to ensure it is compatible with the surface.

*Treatment should only be performed in dry weather conditions. Avoid direct sunlight and excessive heat.

Watch WOCA DENMARK 'how to' youtube video here.